在生產完鋁卷后需要進行簡單的包裝，就像你買東西有包裝一樣，既美觀又有保護性!那么鋁卷應該怎么包裝呢?鋁卷生產廠家為您講解下。
After the aluminum coil is produced, it needs simple packaging, just like you buy something with packaging, which is both beautiful and protective! How should the aluminum roll be packed? The aluminum coil manufacturer will explain it to you.
對于厚度大于0.05mm且處于堅硬狀態的鋁卷，一般可以用井字框包裝，包裝應滿足儲運要求。井字架是木制的，上下木塊是由兩塊木塊組成的。下部木塊的高度應滿足再次轉動的要求。上木塊做成與軋輥徑向相對應的弧形。
For aluminum coils with a thickness greater than 0.05mm and in a hard state, they can generally be packed with a box, and the packaging shall meet the storage and transportation requirements. The trellis is made of wood, and the upper and lower wooden blocks are composed of two wooden blocks. The height of the lower wood block shall meet the requirements of re rotation. The upper wood block shall be made into an arc corresponding to the radial direction of the roller.
上下木塊用螺釘固定，螺釘的長度應低于上木塊的弧面，以免刺傷鋁線圈。產品通過檢驗并加蓋檢驗印章。，鋁箔卷應包裹一層強中性或弱酸性材料(通常具有高釋放性)，并在其上貼上裝箱單，搭接處用膠帶粘貼牢固。
The upper and lower wood blocks shall be fixed with screws, and the length of the screws shall be lower than the arc surface of the upper wood block to avoid hurting the aluminum coil. The product passes the inspection and is stamped with the inspection seal. First of all, the aluminum foil roll shall be wrapped with a layer of strong neutral or weak acid material (usually with high release), and the packing list shall be pasted on it. The overlap shall be firmly pasted with adhesive tape.

在端面上放一個軟襯墊，保護鋁盒輥的端面。其次，加入干燥劑，用整塊塑料布包裹整個料卷，用膠帶將外塑料布口向下貼在搭接處，將塑料布兩端多余部分塞到管芯內。
Place a soft pad on the end face to protect the end face of the aluminum box roll. Secondly, add desiccant, wrap the entire roll with a piece of plastic cloth, stick the outer plastic cloth mouth downward at the lap joint with adhesive tape, and plug the excess part at both ends of the plastic cloth into the tube core.
此外，整個鋁線圈沿圓周方向用相同尺寸的防水紙板包裹，兩端面封閉，端面與圓周的接縫和所有縫隙用膠帶粘貼牢固。將包好的鋁箔卷放在井字框上，用鋼帶沿圓周方向固定，要扎牢。
In addition, the entire aluminum coil is wrapped with waterproof cardboard of the same size along the circumference, with both ends closed, and the joints between the end face and the circumference and all gaps are firmly pasted with adhesive tape. Place the wrapped aluminum foil roll on the tic tac toe frame, and fix it with steel strip along the circumference, and fasten it firmly.
在包裝好的鋁箔卷端面上放一個盒卡。除了箱子和井字架的承載能力和包裝成本，還要考慮運輸方式和用戶的搬運能力。更多相關事項就來我們網站http://m.baihuiplaza.com進行咨詢吧！
Place a box card on the end face of the packed aluminum foil roll. In addition to the carrying capacity and packaging cost of boxes and trellises, the mode of transportation and the handling capacity of users should also be considered. Come to our website for more information http://m.baihuiplaza.com Consult!