1、工業設備
1. Industrial equipment
自動噴涂設備應完好無缺，運作平穩，無水準和豎直震動，噴漆輥切削細膩，水準震動操縱在容許區域內，不然會直接影響鍍層表層質量。
The automatic spraying equipment shall be intact and operate smoothly without horizontal and vertical vibration. The spraying roller shall be finely cut and the horizontal vibration shall be controlled within the allowable area, otherwise the quality of the coating surface will be directly affected.
2、自然環境
2. Natural environment
噴漆室內部結構清、污染治理、防蟲，具備建議的空氣流通特點，確保噴漆表層質量不會受到環境污染。與此同時，當溫度發生改變時，還應調節制作工藝規范。
The interior structure of the paint spraying room is clean, pollution control, insect prevention, and has the recommended air circulation characteristics to ensure that the quality of the paint spraying surface will not be polluted by the environment. At the same time, when the temperature changes, the manufacturing process specification should also be adjusted.
3、原材料
3. Raw materials
鍍層和鋁磁鐵線圈是危害五顏六色鍍層鋁電磁線圈鍍層品質的主要要素。因為鍍層生產批號正中間的色調誤差、鍍層粒度分布不夠、鍍層率低、涂層與有機溶液不一致，造成鋁電磁線圈不勻稱、膜厚不均勻、邊沿撓度值差等。

The coating and aluminum magnetic coil are the main factors that endanger the coating quality of the colorful coating aluminum magnetic coil. Because of the hue error in the middle of the coating production batch number, insufficient coating particle size distribution, low coating rate, and inconsistency between the coating and the organic solution, the aluminum electromagnetic coil is uneven, the film thickness is uneven, and the edge deflection value is poor.
4、人為要素
4. Human factors
職工實際操作技術性的熟練掌握和標準水平對噴漆品質還有較大的危害。因而，要加強對操作工作人員的了解和學習培訓，使職工把握涂裝工藝的規范和實際操作關鍵。
The proficiency and standard level of the actual operation technology of the staff have great harm to the painting quality. Therefore, it is necessary to strengthen the understanding, learning and training of the operators, so that the employees can grasp the specification of the coating process and the key to the actual operation.
5、制作工藝
5. Manufacturing process
涂裝工藝與噴漆品質息息相關，噴漆輥、鍍層輥、準確準確測量輥、防水卷材的相對性角速度應調節在建議區域內。鍍層應按照系統軟件和膜厚設定建議的黏度范疇，以保證五顏六色鍍層鋁卷的品質。
The painting process is closely related to the painting quality. The relative angular velocity of the painting roller, coating roller, accurate and accurate measuring roller and waterproof roll should be adjusted within the recommended area. The coating shall set the recommended viscosity range according to the system software and film thickness to ensure the quality of the colorful coated aluminum coil.